ServerBudget

VPS Hourly vs Monthly vs Annual Cost: A Recomputable 1, 3, 6, 12 and 24 Month Worksheet

By Marcus Reid · Published Nov 11, 2026 · Last updated Nov 11, 2026

Short answer: The three billing shapes produce three different answers to the same question, and you can compute all of them from published numbers. On a public price list with hourly rates and monthly caps, the cap is reached at almost exactly 672 hours of use - 28 days - because on every plan checked, monthly cap divided by hourly rate equals about 672. An always-on 1 vCPU / 1 GB plan therefore costs $6.00 per month, $18 over 3 months, $72 over 12 months and $144 over 24 months. A flat $10 monthly tier on a different public price list costs $30, $120 and $240 over the same 3, 12 and 24 months. For a short-lived project that exists only 100 hours a month, the hourly plan costs $0.893 per month while the flat tier still costs $10, because the flat contract has no hours-used input. Neither page publishes an annual discount, so the honest annual total is simply 12 times the monthly figure. Below are the formulas, every input with its source, the full cumulative tables, and the limits of what this comparison can claim.

The verdict, in one line

Billing shapeWhat you multiply3 months, always on24 months, always on
Hourly with a monthly capmin(hourly rate x hours used, monthly cap)$18 at the $6 cap$144 at the $6 cap
Flat monthly tiermonthly price x months$30 at $10/month$240 at $10/month
Annual payment12 x monthly price, since no discount is published$120 at $10/month$240 over two years

The three rows are derived arithmetic from two independent public price lists, not a vendor quote and not a recommendation. They are not like-for-like products, and the article says so below.

1. The formulas, with every input named

Two contracts are being compared. One publishes an hourly rate and a monthly cap; the other publishes a flat monthly price. [S1][S2]

capped_plan_total(n, H) = n x min(r_hourly x H, cap_monthly)
    flat_plan_total(n)      = n x price_monthly
    break_even_hours        = cap_monthly / r_hourly
    cap_saving_per_month    = (r_hourly x 730) - cap_monthly      # if positive

    n = number of months (1, 3, 6, 12, 24)
    H = hours the machine exists in each month
    r_hourly, cap_monthly, price_monthly = published figures, listed under Sources
    730 = an always-on month (365.25 x 24 / 12 = 730.5 hours, rounded down);
    #      chosen because it exceeds the derived 672-hour cap threshold

Every number produced in this article uses only those inputs. No tax, promotion, renewal change, add-on, currency conversion or support fee is folded in, because each of those is a separate published item - and several are explicitly excluded from refunds by the flat-tier vendor's terms. [S3]

The hourly vendor's FAQ states that bundled plans have a monthly cap so you never pay more than the flat monthly price, that v5 Droplets are billed on actual hours used each month and are not capped at 672 hours, and that effective January 1, 2026 billing moves to per-second with a minimum charge of 60 seconds or $0.01, whichever is higher. [S1] The 672-hour figure in that FAQ is the reason the derived break-even column below is meaningful.

2. Table A: published hourly rates, caps, and the derived 672-hour line

All figures in the first three columns are transcribed from the public pricing page's embedded plan data. [S1] The last two columns are derived arithmetic.

Plan slugHourly rateMonthly capDerived break-even hoursDerived days at 24 h/day
s-1vcpu-512mb-10gb$0.00595$4672.2728.01
s-1vcpu-1gb$0.00893$6671.8928.00
s-1vcpu-2gb$0.01786$12671.8928.00
s-2vcpu-2gb$0.02679$18671.8928.00
s-2vcpu-4gb$0.03571$24672.0828.00
s-4vcpu-8gb$0.07143$48671.9928.00
s-8vcpu-16gb$0.14286$96671.9928.00
example: s-1vcpu-1gb
    break_even_hours = $6 / $0.00893 = 671.89 h = 27.995 days
    always-on test   = min($0.00893 x 730, $6) = min($6.5189, $6) = $6.00
    cap_saving       = $6.5189 - $6.00 = $0.5189 per month

The near-identical 672-hour result across seven independently published plan pairs is a property of the price list, not an assumption of this article. It means the cap begins to bind after roughly 28 days of continuous use; below that point the hourly rate is the whole bill.

3. Table B: cumulative spend at 1, 3, 6, 12 and 24 months, always on

Two pairs are shown. The first pair is a 1 vCPU / 1 GB capped plan at a $6 cap versus a flat $10 tier; the second is a 2 vCPU / 4 GB capped plan at a $24 cap versus a flat $40 tier. [S1][S2] H is set to 730 hours so the cap binds in every month.

MonthsCapped $6/moFlat $10/moDerived differenceCapped $24/moFlat $40/moDerived difference
1$6$10$4$24$40$16
3$18$30$12$72$120$48
6$36$60$24$144$240$96
12$72$120$48$288$480$192
24$144$240$96$576$960$384
3 months, capped $6 : 3 x min($0.00893 x 730, $6) = 3 x $6 = $18
    3 months, flat $10  : 3 x $10 = $30
    24 months, capped $24: 24 x min($0.03571 x 730, $24) = 24 x $24 = $576
    24 months, flat $40  : 24 x $40 = $960

Comparability warning: these are two different vendors' products, not the same machine at two prices. The capped 1 GiB plan's row on the pricing table publishes 25 GiB of SSD storage and a 1,000 GiB transfer quota; the flat $10 tier publishes 20 GB of NVMe, a 1 Gbps port and unmetered traffic subject to a fair-use policy. [S1][S2] Units are kept exactly as each page prints them, so GiB and GB are not silently converted here. The table compares billing shapes, not value. A cheaper bill is not a claim of equivalent hardware, and this article makes no such claim.

4. Table C: the short-lived project, where the two shapes diverge most

For a temporary project that is powered on for only H hours each month for three months, the capped plan is billed on H while the flat tier is billed the same $10 regardless of H. [S1][S2]

H (hours/month)Capped plan per monthCapped plan, 3 monthsFlat tier, 3 monthsDerived difference
50$0.4465$1.3395$30$28.6605
100$0.8930$2.6790$30$27.3210
200$1.7860$5.3580$30$24.6420
300$2.6790$8.0370$30$21.9630
400$3.5720$10.7160$30$19.2840
672$6.00 (cap binds)$18.00$30$12.00
730$6.00 (cap binds)$18.00$30$12.00
H = 100: 3 x min($0.00893 x 100, $6) = 3 x $0.8930 = $2.6790
             flat: 3 x $10 = $30

This is the scenario the original comparison set never worked through: a 3-month temporary project and a 2-year resident service produce different answers from the same two price lists. For intermittent use, the hours-used input dominates. For always-on use, only the monthly figures matter.

Reading about hourly, monthly and annual terms raises a separate question, and the OS image age page traces image release dates back to the provider template page.

Looking only at hourly, monthly and annual terms will not settle the choice; the VPS outbound identity page covers the outbound reputation questions a spec sheet never answers.

Once you have checked hourly, monthly and annual terms, the promo renewal cost page shows what the same plan costs once the introductory term ends.

5. What "annual" actually means on these pages

Neither price list publishes an annual discount percentage. [S1][S2] Therefore the only defensible annual total is 12 times the monthly figure, as shown in Table B. Anything else would require an unpublished number.

Three published items do change a yearly decision, and they are recorded here rather than silently folded into the tables:

The terms also exclude several items from refunds: dedicated IP addresses, operating systems, licenses, upgrades, renewals, technical assistance, add-ons or domain fees. [S3] A yearly prepayment is therefore not automatically reversible, which is a different question from the total cost.

6. What could not be read, and what is not claimed

One vendor in the comparison set is recorded in a local worksheet as publishing an hourly range alongside a monthly table, but every one of its pricing, product, terms and SLA paths returned HTTP 403 Managed Challenge on 2026-11-11 under two different user agents. [S4] Its numbers are consequently not used here; no figure is quoted from memory. The hourly-versus-monthly arithmetic above rests only on the two public pages that were actually retrieved. [S1][S2]

This article contains no estimate of traffic, search volume, uptime, performance or ranking outcome, and no analytics data. It does not read the two data sources reserved for the end of the 28-day reporting cycle. It also contains no self-run measurement: every dollar figure is either transcribed from a public page or produced by a formula printed above with its inputs named.

7. Five-minute worksheet

  1. Decide H, the hours the machine will exist per month, and n, the number of months.
  2. If the plan has an hourly rate and a cap, compute min(rate x H, cap) x n. If it has a flat price, compute price x n.
  3. Check whether the cap binds: compare H with cap / rate. On the price list here that threshold is about 672 hours.
  4. Add separately priced items - control-panel licenses, extra addresses, domain fees - before comparing totals, and check whether they are refundable. [S2][S3]
  5. Write down the billing shape next to the number. A $2.6790 three-month total and a $30 three-month total are not comparable unless you also record that one is hours-based and the other is not.

Bottom line: hourly billing with a monthly cap is cheaper for intermittent use and becomes a flat monthly bill after about 28 days of continuous uptime; a flat tier costs the same regardless of hours used; and with no published annual discount, yearly totals are just monthly figures multiplied by twelve. [S1][S2][S3] If you need a number this worksheet does not produce, the missing input is the one the price pages do not publish - not something to fill in with an estimate.

Frequently Asked Questions

Is hourly billing cheaper than monthly billing?

It is cheaper when the machine runs for fewer hours than the cap threshold. On the price list examined here, monthly cap divided by hourly rate is about 672 hours on all seven plans checked, so below roughly 28 days of continuous use the hourly bill is smaller and above it the cap makes the bill flat.

Does paying annually save money on these plans?

No annual discount is published on either price list read for this article, so the annual total is 12 times the monthly figure. One plan page attaches a free domain to annual hosting, which is a benefit but not a published price reduction.

What does a three-month project cost compared with a two-year service?

Using the published figures: a capped 1 vCPU / 1 GB plan is $18 for three months and $144 for 24 months when always on, while a flat $10 tier is $30 and $240. For a project powered on only 100 hours a month, the capped plan is $2.679 for three months. These are derived totals from two different vendors' price lists, not like-for-like product quotes.

Sources

All pages read on 2026-11-11.

No sentence in this article is reproduced from the three compared sites; only published prices, plan parameters and policy terms are used. Every total, ratio and break-even figure is labelled derived arithmetic with its formula and inputs shown. No benchmark, traffic estimate, analytics figure or ranking data appears here.

Marcus Reid
Systems Architect & VPS Infrastructure Analyst

Marcus has been working with virtualized server infrastructure since 2015, deploying and benchmarking VPS and cloud instances across DigitalOcean, Vultr, Hetzner, OVHcloud, Contabo, RackNerd, Hostinger, and the major hyperscalers. His work focuses on the gap between what providers advertise and what actually happens when you deploy a real workload. He verifies every price and specification against official provider pages before publication.